Repairing Faulty Renault Clio Key Fobs
Renault has revolutionised the Clio with the fifth-generation model. The interior of the new Clio is far superior to that of the earlier model, and offers a more refined driving environment.
It also has the largest infotainment screen in this class, ranging from 7 to 10 inches dependent on the specifications. It’s also packed with other features that make it a formidable mini.
Dead coin battery
If your Clio’s remote fob is not working it is time to replace the battery. The battery is usually one that is a button cell and it can easily be replaced at home. It is important to choose the right size, voltage and type to do the job. Be careful not to let the battery touch your skin. This can damage the electronic chip in the key fob due to oil and moisture.
Normaly the battery will start to fail before it goes out of service. You might find that your car will not begin to start after pressing the ignition switch. The key fob will then click but not turn. This indicates that the battery in the coin-cell is nearing its end.
Another possible reason for a key fob to stop functioning is interference. This can be caused by transmitters that operate on the same frequency band, insufficient weather conditions, or malfunctioning electronics. The remote control will work when you’re near the car, but not from away.
If the key fob is not working then you can reset it by disconnecting the battery at 12 volts for a short period of time. Be sure to disconnect the negative terminal first, then the positive one. This will deplete the system of all residual electrical energy.
Water damage
The Renault Clio is a great little car that is full of personality and decent tech. However, there are some problems that can arise with the little French fighter, especially with regard to key fobs. These devices can be a pain to handle however there are ways to stay clear of them.
Water and electronics do not mix well, and they could cause damage to the chip on the fob. The splash of water from a shower or bath is fine, however submerging the fob in a pool of ocean or water could damage it. This is especially true if the salt is present in the water, which could be more harmful than clean tap water.
If your key fob is submerged in water it is best to wash the device as promptly as you can with isopropyl or an electronic cleaner. This will stop the water from causing damage to the chip as well as removing any dirt, grime, or oil that may be clogging up the circuitry.
You can try to fix your fob by changing the battery after it has become dry. If you are unable to get it to function, it’s best to purchase an entirely new one. Don’t purchase second-hand keys on eBay as they won’t be programmed for the vehicle you own.
Key fobs that are defective
Key fobs that are defective can cause issues with the RKE system in your vehicle, for instance not locking the doors or starting the vehicle. In renault key programming is caused by interference from wireless devices that transmit on the same frequency as the key fob. These include radar detectors that are aftermarket and alarms. They could interfere with the signal from the key fob to the receiver module.
The first thing you should check when your key fob stops functioning is its battery. Most modern key fobs use batteries that are designed to last for a long period of time, but they eventually get worn out and need to be replaced. One of the most obvious indications that a key fob’s battery is wearing out is a decrease in signal strength and range.
In just a few easy steps to follow, you can replace the key fob’s battery. The website of the manufacturer often contains instructions and YouTube is full of videos showing how to replace the battery in your particular vehicle model.
If you can’t replace the battery in your key fob, you should try to start the vehicle using the backup system, which is available in many automobiles. In most cases, you will have to shut the doors to your car and then press the fob’s start button with the physical key. If you’re not able to start the vehicle using this method, you should contact an expert or a mechanic to determine the cause of the problem.
Receiver module that is defective
A malfunctioning receiver module in the Renault Clio can cause the remote keyless system to not function properly. It can also affect other systems within the car, for example the infotainment system. The issue could be caused by a dead 12 volt battery, signal interference, or a chip that is defective. To fix this problem take out the 12 volt vehicle battery. Then you can use a multimeter to verify the voltage and the continuity of each fuse in the fuse box. Replace any fuses that have blowing.
A dead coin battery is the most common cause of the Renault Clio remote not working. However, the issue may be caused by other causes, such as worn buttons or poor contact between batteries as well as the key fob’s metal clip for retaining it, or water damage. You can usually replace the battery by following the directions in your owner’s manual. It’s important that the battery replacement is the correct size and voltage.
The internal chip of the key fob can be damaged by water damage or excessive exposure to sunlight or other electromagnetic fields. It may also be damaged by external radio transmitters that operate on the same frequency as the key fob. In these situations, the transmitter of the key fob may work locally but not from a distance. It is possible to fix this problem by reprogramming your key using an OBDII scan or following the directions in the owner’s manual.
